Model 875BC Tube Expander uses 90 degree jaws to allow the insertion of a fitting while the tube is expanded. It has the same patented cam/jaw design as our Model 875AC. Teflon-coated jaws allow the tube and fitting to easily slide off the unit as an assembly.
Model 125B-1 Tube cutter is designed for limited production of a variety of sizes and types of plastic tubing. It features interchangeable bushings, counter, blades. It can be operated by finger switch, foot pedal or our new 700-1 Auto-Cycler. See Model 450-A for cutting lengths shorter than 2-1/2". Used for plastic, silicone and rubber tubing.
Model 400-A micro - o.d. Tube Cutter is designed for production of very small diameter tubing from .005" to 3/8" diameter and lengths 2-1/2" and up. It features an interchangeable bushing (Teflon and optional counter, base extenders, bushing sets, and replacement blades.) See Model 450-A for cutting lengths shorter than 2-1/2" For use with plastic, silicone and rubber tubing.
Model 450-A micro - o.d. Tube Cutter cuts very small diameter tubing (.005" to 3/8") to very short lengths (.093 to 2-1/2"). The bushing (Teflon) is interchangeable so cutter can be used with more than one diameter or length of tubing. A unique ejection system ejects cut tubing to a tray or other receptacle (user to provide). For use with plastic, silicone and rubber tubing. See Model 400-A for cutting lengths longer than 2-1/2".
Lakeview's E-Z Bonder is designed for quick application of a bonding material, such as cyclohexanone, to the O.D. of medical tubing or fitting. Its affordable cost makes it practical to use in multi-station assembly operations. Cuts fumes and evaporation of liquid by as much as 95%.